Tag Archives: stove

Woodwarm Fireview Slender 5KW review

Spring is maybe here, so how did we get on with our newly installed Woodwarm Fireview Slender 5KW over the winter?  It was great (pun resisted)!

We chose the “slender” model because we were limited to 5KW for our room size, but most 5KW stoves are quite small – whereas we wanted a full “widescreen” fire!  The Woodwarm Slender range are shallower than normal, meaning you get the overall width for a nice looking fire (and decent size logs) but can have a stove small enough to only output 5KW.  Any more than that and the living room would feel like a pizza oven!  The stove itself looks good – timeless styling without looking twee and “country-cottage”.

We had to gradually build up the test burns, the first being just a handful of kindling – then second and third burns progressively larger.  This cures the paint on the stove, and has the unpleasant side-effect of stinking the room out.  Once the stove was fully operational it has performed really well, not much more to say really, it burns wood, it burns coal, it gets hot!  The instructions go through how to use the vents properly, using the lower ones like a choke on a car to get it started, then gradually closing it and also reducing the upper vent to get a clean burn.  Not sure if we’ve fully mastered it yet but once the fire gets going it is very easy to maintain.  We attached a magnetic thermometer to help regulate the temperature in the “optimum” burning zone.

Cleaning out the stove is easy enough, the ash pan slides out the bottom section using a detachable handle – although it’s surprising how quickly the ash accumulates!  All of the handles on the stove look nice, but they small and quite stiff, so require a fair bit of strength to turn – plus of course they get very hot so use the supplied tool!

All in all, very pleased with it! Our living room looks loads better, and feels MUCH warmer – a grate* choice!

*I failed

Advertisements

3 Comments

Filed under House

Relight my fire!

Next up, it’s time to sort out the manky fireplace in the living room – it’s days are numbered!

And here is progress after day one: old fireplace is ripped out, chimney lined, fireplace opened up, lintel and brickwork done.

And day two, opening is lined, walls rendered, hearth fitted, mantelpiece fitted:

By the end of day three it’s all done (bar the painting):

We are really pleased with the end result – excellent work from Carl Cox… no not him – I mean this Carl Cox.

The stove is a Woodwarm Fireview Slender 5KW – the “slender” bit is the depth, meaning we get a visually wide stove but it isn’t too big (and hot) for the size of room.

Frustratingly we can’t light the fire for over a week, while we wait for the plaster to dry.

Leave a comment

Filed under House